TM 5-2420-230-24-2
Cooling System
Fan Hub Assembly (8-04)
B Series Shop Manual
Page 8-9
2 Inch Pipe
Press the bearing flush with the front of the housing or to
the snap ring.
Snap Ring Pliers
Install the second snap ring if so equipped.
Supporting the bearing inner race with a 1.25 inch pipe
coupling, press the hub/shaft in until it bottoms on the
bearing.
16 mm
Secure the assembly and install the retainer and center
bolt. Tighten to 77 Nm [57 ft-lb].
L-398