TM 5-2420-230-24-2
Fan Hub Assembly (8-04)
Cooling System
Page 8-8
B Series Shop Manual
1 inch Drift
Support the fan hub bracket housing and press out the
shaft/hub.
Approximately 6 tons of pressure is required.
Snap Ring Pliers
Turn the bracket housing over and remove the snap ring
if so equipped.
2 Inch Pipe
Press on the O.D. of the bearing to remove from the
housing.
Fan Hub Assembly (8-04)
Snap Ring Pliers
If the bracket housing is equipped for snap rings, install
the front snap ring.
L-397
