TM 5-2420-230-24-2
Engine Storage - Short Term (14-09)
Section 14 - Engine Testing - Group 14
Page 14-30
B Series Shop Manual
Drain the lubricating oil pan, the oil filters, and the fuel
filter.
Install the drain plug into the oil pan, and install the filter
cans. Tighten according to specifications.
Disconnect the electrical wires from the fuel pump
Drain the coolant passages and jackets.
NOTE: It is not necessary to drain the coolant if it is a
permanent-type antifreeze with a rust inhibitor. Do not drain
the coolant if the engine is installed in a vehicle.
Look the engine over closely, and cover all openings with
tape to prevent dirt and moisture from entering.
Install a warning tag which alerts others of no oil in the
engine and that it must not be started.
L-460
