TM 5-2420-230-24-2
Engine - Painting (14-08)
Section 14 - Engine Testing - Group 14
Page 14-28
B Series Shop Manual
3. Do not operate the engine at rated speed (RPM) and
full load for more than 5 minutes at any one time.
Engine - Painting (14-08)
Remove all belts from the engine.
Cover the following parts of the engine:
Exhaust and intake openings
Electrical components
Fuel inlet and drain connections
Any exposed fittings, threads, and electrical wire
terminals
Warning: When using a steam cleaner, wear protective
clothing and safety glasses or a face shield. Hot steam
can cause serious personal injury.
Use steam to clean the engine, and dry with compressed
air.
NOTE: Make sure all engine surfaces are clean and dry
before painting the engine.
Protect the following components from the paint:
All dataplates
Valve and injector set marks.
Exhaust manifold
Turbocharger turbine housing
Flywheel
Flywheel housing transmission mounting surface
L-458