TM 5-2420-230-24-2
Engine Fuel Heater, Electric (005-008)
B3.9 and B5.9 Series Engines
Page 5-10
Section 5 - Fuel System - Group 05
Push on the fuel drain valve for approximately 5 seconds
to reduce fuel spillage during filter removal.
Remove the fuel filter.
Remove the fuel filter spud.
Remove the fuel heater from the filter head. The heater
should be able to be pulled off the filter head.
Install (005-008-026)
Place the fuel heater, gasket side facing up, against the
filter head.
Apply Loctite to the filter spud.
Install the fuel filter spud.
Torque Value: 41 Nm
[30 ft-lb]
Torque Value: 27 Nm
[20 ft-lb]
L-870