TM 5-2420-230-24-2
Cold Start Timing Advance System (KSB) Pump Mounted (005-070)
B3.9 and B5.9 Series Engines
Page 5-104
Section 5 - Fuel System - Group 05
Use a multimeter to perform a continuity check between
port A of the metro-pack connector and the female spade
connector at the fuel pump shutdown solenoid connector.
Repair the wire if there is an open circuit.
Ohms Resistance - Less than 10.
Use a multimeter to perform a continuity check between
port B of the metro-pack connector and the female spade
connector at the KSB wax motor connector.
Repair the wire if there is an open circuit.
Ohms Resistance - Less than 10.
Electrical Solenoid Style
Engines with CPL 1579 do not have a resistor in the
harness.
Engines with CPL 1351 must be wired with the resistor in
the harness.
L-964