TM 5-2420-230-24-2
Fuel-Water Separator (006-043)
B3.9 and B5.9 Series Engines
Page 6-32
Section 6 - Injectors and Fuel Lines - Group 06
Assemble the fuel drain manifold and high-pressure lines.
Leave the high-pressure fittings loose at the injectors.
WARNING
It is necessary to turn the keyswitch to the ON position.
Because the engine can start, be sure to follow all of the
safety precautions. Use the normal engine starting pro-
cedure.
17 mm, 19 mm
Crank the engine to allow entrapped air to bleed from the
lines.
Tighten the fittings.
Torque Value: 38 Nm
[28 ft-lb]
Fuel-Water Separator (006-043)
General Information
CAUTION
Some of the clearances between the fuel injection pump
parts are very close. For this reason, the parts can
easily be damaged by rust formation and contaminants.
NOTE: Be sure to use the correct element.
Filtration and separation of water from the fuel is important
for trouble-free operation and long life of the fuel system.
The element has a valve that can be opened regularly to
drain the collected water.
L-1002
