TM 5-2420-230-24-2
Water Pump (008-062)
B3.9 and B5.9 Series Engines
Page 8-56
Section 8 - Cooling System - Group 08
13 mm
Install the water pump.
Torque Value: 24 Nm
[18 ft-lb]
3/8-Inch Square Drive
Lift the tensioner and install the belt. Refer to Procedure
008-002.
Service Tip: If difficulty is experienced installing the drive
belt, such as the belt seems too short, position the belt over
the grooved pulleys first; then, while holding the tensioner
up, slide the belt over the water pump pulley.
Fill the cooling system. Refer to Procedure 008-018.
Install the pressure cap. Operate the engine and check for
coolant leaks.
Engine Temperature:
80 C
[180 F]
L-1112