TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Fan Belt Tensioner (008-087)
Section 8 - Cooling System - Group 08
Page 8-59
Install (008-087-026)
15 mm
Install the tensioner and capscrews.
Torque Value: 43 Nm
[32 ft-lb]
3/8-Inch Square Drive
Lift and hold the tensioner. Install the drive belt and release
the tensioner. Refer to Procedure 008-002 for drive belt
procedure.
Service Tip: If difficulty is experienced installing the drive
belt; for example, the belt seems too short; position the belt
over the grooved pulleys first; then, while holding the ten-
sioner up, slide the belt over the water pump pulley.
L-1115