TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Turbocharger Oil Supply Line (010-046)
Section 10 - Air Intake System - Group 10
Page 10-41
Install (010-045-026)
Apply a thin film of oil to the drain line o-rings.
Push the drain line into the drain line boss. Be sure both
o-rings are completely seated in the bore.
Install the drain line capscrews with a new gasket.
Torque Value: 24 Nm
[18 ft-lb]
Operate the engine, and check for leaks.
Turbocharger Oil Supply Line
(010-046)
Initial Check (010-046-001)
Inspect the line for oil leaks or damage. Replace as
necessary.
Remove (010-046-002)
Remove the oil supply line from the oil filter head (1).
Remove the oil supply line from the turbocharger bearing
housing (2).
Inspect for Reuse (010-046-007)
Inspect the line for cracks, wear, and damage.
Inspect o-rings for cracking and fretting. Replace as
necessary.
L-1165
