TM 5-2420-230-24-2
Starter Solenoid (013-019)
B3.9 and B5.9 Series Engines
Page 13-28
Section 13 - Electrical Equipment - Group 13
Turn the starter switch to the START position.
If the meter indicates system voltage at the starting motor
switch input terminal, the starting motor switch is not the
cause of the complaint.
Check the wiring from the starting switch to the starting
motor solenoid "B" terminal, and from the starting motor
solenoid to the battery for broken or damaged wires.
If the meter indicates no voltage, the switch is defective and
must be replaced.
Check the wiring from the starting switch to the starting
motor solenoid ``B'' terminal and from the starting motor
solenoid to the battery for broken or damaged wires.
Starter Solenoid (013-019)
Initial Check (013-019-001)
Before troubleshooting the starting motor, make sure the
battery terminals are not loose or corroded.
If the starting motor solenoid does not make a sound,
check for loose wiring connections.
L-1286
