TM 5-2420-232-10
0004
EMS INSTRUMENT CLUSTER CONTINUED
4-Wheel-Drive Function
0004
In order to control traction on the machine, 4WD is available. When the ignition is ON and the engine is running the function
can be enabled. The system is turned ON/OFF by a switch on the front console. When the switch is turned ON and the 4WD is
engaged, the warning light (Figure 42, Item 18) on the EMS will be illuminated. Simultaneously, a warning light on the front
console warning panel will be illuminated. When each change of mode is made, the EMS will display a message for a period
of three seconds. When the 4WD feature is activated, the message "4 WHEEL DRIVE" will be displayed; when the function is
deactivated, the message "2 WHEEL DRIVE" will be displayed.
4WD cannot be switched on if the machine s road speed is greater than 3 mph (5 kph).
435-A0268-8
Figure 42. 4-Wheel-Drive Function
04
Change 1
0004-42