14
TM 5-2420-232-10
SUPPORTING INFORMATION
-
COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS
003
1
This work package lists the COEI and BII for the HMEE-I to help inventory the items for safe and efficient operation of the
equipment. Where to find operation instructions, troubleshooting procedures, and stowage locations for the COEI and BII are
also provided.
OPERATION INSTRUCTIONS FOR COEI AND BII
00031
For instructions on how to operate the COEI, go to WP 0034 for the impact wrench, WP 0035 for the chain saw, WP 0036 for
the pavement breaker, WP 0037 for the hammer drill, and WP 0038 for the post driver.
TROUBLESHOOTING PROCEDURES FOR COEI AND BII
00031
For troubleshooting the COEI and BII, go to WP 0044.
STOWAGE LOCATION OF COEI AND BII
00031
For stowage location of the COEI and BII, go to WP 0007.
INTRODUCTION TO TABLE 1 AND TABLE 2
00031
COEI and BII are presented in the following lists:
Table 1. COEI. This listing is for information purposes only and is not authority to requisition replacements. These items are
part of the HMEE-I, but they are removed and separately packaged for transportation or shipment. As part of the end item,
these items must be with the end item whenever it is issued or transferred between property accounts. Illustrations are fur-
nished to help identify the items.
Table 2. BII. These essential items are required to place the HMEE-I in operation, operate it, and to perform emergency
repairs. Although shipped separately packaged, BII must be with the HMEE-I during operation and when transferred between
property accounts. Listing these items is the authority to request/requisition them for replacement based on authorization of the
end item by the TOE/MTOE. Illustrations are furnished to help find and identify the items.
EXPLANATION OF COLUMNS IN COEI AND BII LISTS
00031
1.
Column (1) Illus Number. Gives you the number of the item illustrated.
2.
Column (2) National Stock Number. Identifies the stock number of the item to be used for requisitioning purposes.
3.
Column (3) Description, Part Number/(CAGEC). Identifies the Federal item name (in all capital letters) followed by a
minimum description when needed. The stowage location of COEI and BII is also included in this column. The last line
below the description is the part number and the Commercial and Government Entity Code (CAGEC) (in parentheses).
4.
Column (4) Unit of Issue (U/I). Unit of Issue (U/I) indicates the physical measurement or count of the item as issued per
the National Stock Number shown in column (2).
5.
Column (5) Quantity Required (QTY RQD). Indicates the quantity required.
0031-1
Change 1