TM 5-3805-280-24-1
Tests
Typical Front or Rear Pump Control Valve Pilot Oil Control Signal--
Specification
Pressure ............................................... 1655--1930 kPa (16.5--19.3 bar)
(240--280 psi) at slow idle with
all functions in neutral
6. Run engine at fast idle with all functions in neutral.
Record pressure readings.
Typical Front or Rear Pump Control Valve Pilot Oil Control
Signal--Specification
Pressure ............................................... 1035--1520 kPa (10.3--15.2 bar)
(150--220 psi) at fast idle with all
functions in neutral
7. Run engine at slow idle. Actuate arm in function over
relief. Record pressure readings.
Typical Front or Rear Pump Control Valve Pilot Oil Control
Signal--Specification
Pressure ............................................... 3310--3515 kPa (33.1--35.2 bar)
(480--510 psi) at slow idle with
arm in function over relief
8. Run engine at fast idle. Actuate arm in function over
relief. Record pressure readings.
9025
Typical Front or Rear Pump Control Valve Pilot Oil Control
25
Signal--Specification
92
Pressure ............................................... 3380--3585 kPa (33.8--35.9 bar)
(490--520 psi) at fast idle with
arm in function over relief
Continued on next page
TX,9025,GG2652
1921MAY985/6
6-223
