TM 5-3805-280-24-1
Track System
01
0130
14. Apply thread lock and sealer (medium strength) to
9. Wipe finger prints and foreign material off seal ring
48
threads of plug and install.
face using clean oil and lint-free tissues. Apply a
thin film of oil to each seal face.
15. Install yoke (I). Tighten cap screws (J).
10. Install axle (H) into idler.
Yoke-to-Bracket Cap Screw--Specification
11. Repeat procedure for other side of idler.
Torque................................................................... 206 Nm (152 lb-ft)
12. Fill front idler with approximately 265 mL (8.96 oz)
of oil. (See Track Roller, Front Idler and Carrier
Roller Oil in Group 0004.)
13. Clean threads of drain plug (D) using cure primer.
TX,01,UU3858
1918SEP982/2
11-48