TM 5-3805-280-24-1
Hydraulic System
11. Remove parts (A--E).
Remove spanner nut (E) using JDG769 Spanner
Wrench.
02
Inner race of roller bearings (B and D) are a press fit
0260
on shaft.
14
A--Drive Shaft
B--Roller Bearing
C--Spacer
D--Roller Bearing
E--Spanner Nut
TX,02,UU3723
1918SEP988/11
12. Remove cap screws (B), cover (A), and O-ring (C).
13. Remove plug (F) and O-ring (E).
14. Remove pivot bolt (D) using an 8 mm hex key
wrench.
A--Cover
B--Cap Screw (4 used)
C--O-Ring
D--Pivot Bolt
E--O-Ring
F--Plug
Continued on next page
TX,02,UU3723
1918SEP989/11
12-38
