TM 5-3805-280-24-2
Fuel System
FUEL SYSTEM SPECIFICATIONS
35
6
Item
Measurement
Specification
Fuel Filter Base Mounting
Torque
35 Nm (26 lb-ft)
Bracket-to-Cylinder Head
Primary Fuel Filter/Water Separator
Torque
35 Nm (26 lb-ft)
Mounting Base-to-Bracket
Final Fuel Filter Mounting
Torque
35 Nm (26 lb-ft)
Base-to-Bracket
Rotary Fuel Supply Pump
Pressure
28--41 kPa (0.28--0.41 bar) (4--6
psi)
Fuel Supply Pump Cap Screws
Torque
30 Nm (22 lb-ft)
Fuel Supply Pump (On In-Line
Torque
5--7 Nm (4--5 lb-ft) (45--60 lb-in.)
Injection Pumps) Cap Screws
Fuel Shutoff Solenoid Actuator Rod
Torque
15--20 Nm (11--15 lb-ft)
Cap Screw/Nut
Rotary Injection Pump Mounting Nuts Torque
27 Nm (20 lb-ft)
Nippondenso Injection Pump Drive
Torque
47 Nm (35 lb-ft)
Gear Cap Screws
Stanadyne DB2 Fuel Injection Pump
Torque
122 Nm (90 lb-ft)
Drive Gear-To-Shaft Retaining Nut
Torque
Stanadyne DB4 Fuel Injection Pump
Torque
203 Nm (150 lb-ft)
Drive Gear-To-Shaft Retaining Nut
Torque
Rotary Injection Pump Front Access
Torque
2 Nm (1.7 lb-ft) (20 lb-in.)
Plate Cap Screws
Rotary Injection Pump Mounting Nuts Torque
27 Nm (20 lb-ft)
Fuel Injection Pump Delivery Lines
Torque
27 Nm (20 lb-ft)
(At Pump)
Continued on next page
DPSG,OUO1004,276 1920JUL981/3
13-385
