TM 5-3805-280-24-2
Hydraulic System
SWING MOTOR AND PARK BRAKE
START-UP PROCEDURE
IMPORTANT: Swing motor will be damaged if not
filled with oil before operating swing
function. Procedure must be performed
whenever a new swing motor is
installed or oil has been drained from
the motor.
Procedure is to ensure the swing motor
is filled with oil.
A--Swing Motor-to-Hydraulic Oil Tank Drain Line
1. Disconnect swing motor drain line (A).
2. Fill motor with hydraulic oil through drain port until oil
reaches the level of drain port.
NOTE: Air must be allowed to escape from the swing
motor while filling.
3. Connect drain line.
TX,43,SB533 1923SEP981/1
43
4360
3
22-38
