TM 5-3805-280-24-2
Rock Drill
44
9506
A--Screw (4 used)
G--Detector Support
M--Screw (4 used)
S--Screw (4 used)
15
B--Lower Clamp Support
H--Screw (4 used)
N--Brake Reducer Motor
T--Lower Support
C--Elastic Pin (2 used)
I--Upper Clamp Support
O--Elastic Pin (2 used)
U--Elastic Pin (2 used)
D--Shim (2 used)
J--Elastic Pin (2 used)
P--Shim (2 used)
V--Shim (2 used)
E--Shim (2 used)
K--Shim (2 used)
Q--Shim (2 used)
W--Shim (2 used)
F--Stud
L--Shim (2 used)
R--Central Tube
14. Remove four screws (M), brake reducer motor (N),
11. Remove four screws (A), lower clamp support (B),
two elastic pins (O), two shims (P), and two shims
two elastic pins (C), two shims (D), and two shims
(Q).
(E).
15. Remove central tube (R).
12. Remove stud (F), and detector support (G).
16. Remove four screws (S), lower support (T), two
13. Remove four screws (H), upper clamp support (I),
elastic pins (U), two shims (V), and two shims (W).
two elastic pins (J), two shims (K), and two shims
(L).
CED,OUOE019,4 1909MAR999/23
A--Nut (4 used)
B--Cable
17. Remove four nuts (A) and disconnect cable (B).
Continued on next page
CED,OUOE019,4 1909MAR9910/23
23-14