TM 5-3805-280-24-2
Rock Drill
44
9506
A--Screw (4 used)
G--Detector Support
M--Screw (4 used)
S--Screw (4 used)
219
B--Lower Clamp Support
H--Screw (4 used)
N--Brake Reducer Motor
T--Lower Support
C--Elastic Pin (2 used)
I--Upper Clamp Support
O--Elastic Pin (2 used)
U--Elastic Pin (2 used)
D--Shim (2 used)
J--Elastic Pin (2 used)
P--Shim (2 used)
V--Shim (2 used)
E--Shim (2 used)
K--Shim (2 used)
Q--Shim (2 used)
W--Shim (2 used)
F--Stud
L--Shim (2 used)
R--Central Tube
24. Install stud (F) and detector support (G).
20. Install four screws (S), lower support (T), two
elastic pins (U), two shims (V), and two shims (W).
25. Install four screws (A), lower clamp support (B),
two elastic pins (C), two shims (D), and two shims
21. Install central tube (R).
(E).
22. Install four screws (M), brake reducer motor (N),
two elastic pins (O), two shims (P), and two shims
(Q).
23. Install four screws (H), upper clamp support (I),
two elastic pins (J), two shims (K), and two shims
(L).
Continued on next page
CED,OUOE019,15 1901APR9916/21
23-204
