TM 5-3805-281-10
Break-In
EVERY 10 HOURS OR DAILY
1. Perform 10 hours or daily service. (See Maintenance--
Every 10 Hours or Daily chapter.)
2. Watch for fluid leaks.
3. Lubricate working tool pivots every 10 hours during the
first 30--100 hours of operation and when working in
mud or water. (See Maintenance--Every 50 Hours
chapter.)
TX,15,DH5111
1912JUL961/1
AFTER THE FIRST 50 HOURS
1. Perform 10 hours or daily and 50 hour service. (See
Maintenance--Every 10 Hours or Daily and
Maintenance--Every 50 Hours chapters.)
2. Change hydraulic oil filter (See Maintenance--Every
500 Hours chapter) and pilot filter (See
Maintenance--Every 1000 Hours chapter).
3. Check accessible hardware torque. (See Hardware
Torque Specifications in Maintenance chapter.)
TX,15,FF2247 1906JUL941/1
