TM 5-3805-281-10
Operating the Machine
LIFTING THE MACHINE
Use all four lifting rings (A) to lift the machine.
CAUTION: Prevent possible injury from
unexpected machine movement when lifting the
machine. Check lifting capacity of crane before
lifting the excavator. Lift load only as high as
necessary.
Keep all people clear of raised load.
Approximate weight of machine, less bucket, is 31 715 kg
(69,920 lb).
TX,OUOE042,24
1914DEC991/1
INSTALL HYDRAULIC IMPACT BREAKER
CAUTION: The operating weight of the hydraulic
impact breaker is approximately 2195 kg (4840
lb). Use suitable lifting device to position the
impact breaker onto blocking.
1. Support impact breaker approximately 457 mm (18 in.)
off ground using suitable blocking so that impact
breaker is stable and quick-disconnect hitch will not
contact the ground when rotated into position.
NOTE: See Using Quick-Disconnect Hitch in this chapter
for additional information when performing steps 2
through 6.
2. Manually place hitch safety lock pin in unlocked
position and set quick-disconnect switch in cab to
unlatch position. Extend bucket cylinder. Place oil over
relief.
Continued on next page
CED,OUOESLH,4 1908DEC991/2
