TM 5-3805-281-10
Transporting
IMPORTANT: Prevent possible damage to front-end
attachment. Always position arm at 90
to boom when unloading machine.
Unloading machine with arm tucked
may cause machine damage.
3. To move machine over end of trailer onto ramp,
position bucket on ground with flat surface of bucket
resting on ground. Angle (A) of arm to boom should be
90.
TX,40,DH5146
1910AUG962/3
IMPORTANT: Prevent possible damage to hydraulic
cylinders. Do not allow machine to
impact ground with bucket.
4. Bucket must be on ground before machine begins to
tip forward.
5. As machine moves forward, raise the boom and extend
arm until machine is completely off ramp.
TX,40,DH5146
1910AUG963/3
8-7