TM 5-3805-281-24-1
Safety
00
PARK MACHINE SAFELY
01
5
Before working on the machine:
Park machine on a level surface.
Lower bucket to the ground.
Turn auto-idle switch off.
Run engine with engine RPM dial at 1/3 position for 2
minutes.
Move engine RPM dial to slow idle position.
Turn key switch to OFF. Remove key from switch.
Pull pilot control shut-off lever to locked position.
Allow engine to cool.
TX,05,DH5002
1928MAY961/1
SUPPORT MACHINE PROPERLY
Always lower the attachment or implement to the ground
before you work on the machine. If you must work on a
lifted machine or attachment, securely support the
machine or attachment.
Do not support the machine on cinder blocks, hollow tiles,
or props that may crumble under continuous load. Do not
work under a machine that is supported solely by a jack.
Follow recommended procedures in this manual.
DX,LOWER 1904JUN901/1
OPERATE ONLY FROM OPERATOR'S SEAT
Avoid possible injury or machine damage. Do not start
engine by shorting across starter terminals.
NEVER start engine while standing on ground. Start
engine only from operator's seat.
TX,05,FF1615 1914JUN901/1
