TM 5-3805-281-24-1
41. Clean threads of cap screws (A) using cure primer.
Apply thread lock and sealer (medium strength).
42. Install cover (B). Tighten cap screws (A).
Cover-to-Ring Gear Cap Screw--Specification
Torque ........................................................................... 110 Nm (80 lb-ft)
43. Install sprocket. (See procedure in Group 0130.)
02
44. Install propel motor and brake. (See procedure in
0250
Group 0260.)
38
45. Add gear oil. (See Swing Gearbox, Propel Gearbox,
and Pump Gearbox Oils, Group 0004.)
46. Clean threads of plugs using clean and cure primer.
Apply pipe sealant. Tighten plugs.
Propel Gearbox Fill Plug--Specification
Torque ............................................................................. 50 Nm (35 lb-ft)
CED,OUOE023,159
1928MAY9817/17
10-37