TM 5-3805-281-24-2
Removal and Installation
REMOVE ENGINE
CAUTION: Explosive release of fluids from
pressurized cooling system can cause serious
burns
Shut off engine. Only remove filler cap when
cool enough to touch with bare hands. Slowly
loosen cap to first stop to relieve pressure
before removing completely.
1. Disconnect negative (-) battery cable.
2. Drain coolant. Cooling capacity is approximately 30 L
(8 gal).
04
0400
7
TX,0400,DH5392 1915FEB971/8
3. Remove cap screws (A). Remove spring assembly (B).
A--Cap Screw (7 used)
B--Spring Assembly
Continued on next page
TX,0400,DH5392 1915FEB972/8