TM 5-3805-281-24-2
Crankshaft, Main Bearings, and Flywheel
RG5106 UN05DEC97
Seal and Wear Sleeve Installer . . . . . . . . . JDG476 (85)
Used to simultaneously install the new teflon unitized oil
seal and wear sleeve on the rear crankshaft flange. Also
use with JDG796 Alignment Tool to install rear oil seal
housing, eliminating need for dial indicator to measure
runout.
JDG476 (85)
RG,RG34710,1145
1923OCT975/19
Seal and Wear Sleeve Installer Set consists of:
Pilot ................................................................................... JDG477 (85)
Driver ........................................................................................ JDG478
RG,RG34710,1145
1923OCT976/19
RG6214 UN05DEC97
Seal Puller Adapter . . . . . . . . . . . . . . . . . . . . JDG719
Used with a standout metal screw, JDE38-2 Shank, and
JDE38-3 Slide Handle to remove front crankshaft oil seal
with timing gear cover installed. Also used to remove rear
crankshaft oil seal with seal housing installed.
JDG719
RG,RG34710,1145
1923OCT977/19
JDG719 Seal Puller Adapter Set consists of:
Adapter .................................................................................. JDG719-1
Screw (not shown) ....................................................................... 11200
Continued on next page
RG,RG34710,1145
1923OCT978/19
11-192