TM 5-3805-281-24-2
Intake System
7. Remove cap screw (A). Remove charge air cooler (B).
8. Repair or replace as necessary.
9. Install charge air cooler (B). Tighten cap screws (A).
A--Cap Screw (4 used)
B--Charge Air Cooler
05
0520
6
CED,OUOE024,222
1920MAY985/9
10. Install charge air cooler ducts. Tighten cap screws
(B).
Charge Air Cooler Duct Cap Screw--Specification
Torque ............................................................................. 73 Nm (54 lb-ft)
11. Connect connector (C).
12. Install hoses (A and D). Tighten clamps.
A--Charge Air Cooler Duct Upper
Hose-to-Turbocharger
B--Cap Screw (2 used)
C--Connector
D--Charge Air Cooler Duct Lower Hose-to-Intake
Manifold
Continued on next page
CED,OUOE024,222
1920MAY986/9
12-34
