TM 5-3805-281-24-2
Heating and Air Conditioning
8. Remove six through-bolts using special hex drive (A).
IMPORTANT: Do not remove through-bolts unless
suction and discharge manifolds are in
place and tight.
9. Carefully pry head from body using a screw driver. Pry
only slightly around the circumference of the head.
Repeat this procedure until head is removed.
A--Special Hex Drive
T52,1830,K184
1923AUG978/26
10. Remove and discard shaft seal (A).
11. Use two screw drivers to remove discharge valve
plate (B).
A--Shaft Seal
B--Discharge Valve Plate
Continued on next page
T52,1830,K184
1923AUG979/26
18
1830
23
17-43