TM 5-3805-281-24-2
Hydraulic System
15. Measure play (H) between piston connecting rod (F)
ball end and drive shaft socket. Subtract the play
33
reading for piston-to-connecting rod if included.
3360
34
Piston Connecting Rod Ball End-to-Drive Shaft Socket--
Specification
Play............................................................ 0.060 mm (0.0024 in.) nominal
Play....................................................... 0.400 mm (0.0157 in.) limit of use
F--Piston Connecting Rod
G--Drive Shaft
H--Play
CED,OUOE027,297 1903JUN9812/15
16. Remove valve covers (A and F). Remove O-rings (B
and G).
17. Remove set screw (C) from servo piston (E) using a 5
mm hex key wrench. If necessary, heat the set screw
to loosen the thread lock and sealer (medium
strength). Remove piston and pin (H).
A--Valve Cover (Stop)
B--O-Ring
C--Set Screw
D--Cylinder Head
E--Servo Piston
F--Valve Cover (Stop)
G--O-Ring
H--Pin
Continued on next page
CED,OUOE027,297 1903JUN9813/15
19-73
