TM 5-3805-281-24-2
Hydraulic System
DISASSEMBLE AND ASSEMBLE PROPEL PILOT CONTROLLER
33
3360
82
0--Propel Pilot Controller
6B--Seal (4 used)
9--Lock Washer (2 used)
15--Cap Screw, Lock
1--Spacer (4 used)
6C--O-Ring (4 used)
10--Cam (2 used)
Washer, Washer (2
2--Shim (12 used)
6D--Plunger (4 used)
11--Pin (2 used)
used)
3--Balance Spring (4 used)
7--Holder
11A--Bushing (4 used)
16--Plug
4--Spring Guide (4 used)
7B--Bushing (2 used)
12--Spring Pin (2 used)
17--O-Ring
5--Return Spring (4 used)
7C--Bushing (2 used)
13--Spring Pin (2 used)
23--Plate
6--Plunger (4 used)
8--Cap Screw (2 used)
14--Cover
30--Housing and Spools
1. Remove cover (14).
IMPORTANT: The housing and spools (30) are
replaced as an assembly because
2. Slowly loosen cap screws (8) to release spring
the spools are select fitted to bores
force of balance spring (3) and return springs (5) on
in housing. Spools must be installed
holder (7).
into the same ports from which they
were removed.
Continued on next page
TX,33,GG2558
1911MAR971/4