Operating the Machine
5. Remove the Quick-Disconnect Hitch from the hook on
the front of the attachment (H).
ARM DIGGING: For most general excavating, leveling
material, and digging trenches.
To begin excavating, position arm in vertical position and
then move it away from machine approximately 0.61 m (2
Using mainly the arm cylinder (A), retract the arm. As the
bucket fills, curl the bucket while retracting the arm. The
first cut should be approximately 1.2 m (4 ft) long and
75--100 mm (3--4 in.) deep. Remaining cuts should be
approximately 1.2 m (4 ft) long and 100--150 mm (4-6 in.)
Continued on next page