TM 5-2420-230-24-1
Table 3-1. Unit Level Preventive Maintenance Checks and Services (PMCS) for IHMEE. -- Continued
Item to be
Item
Checked or
Not Fully Mission
No.
Interval
Serviced
Procedure
Capable If:
19
Semiannual
Seat belts
Failure to properly inspect and maintain
seat belts can cause serious injury or loss of
life.
If the replacement of any part of the seat
belt is required, the entire belt assembly
must be replaced. Failure to comply may
result in injury or death to personnel.
a. Check for worn webbing at latch and
Webbing is cut, frayed, or
D-loop areas.
excessively worn.
b. Check D-loop for free rotation,
D-loop does not rotate
deformation, cracks or damage.
freely or is deformed,
cracked or broken.
c. Check latch and buckle for wear,
Molded plastic around
deformation, damage or broken casing.
buckle/latch is deformed,
cracked or broken.
d. Check that retractor is not locked up and
Retractor does not operate
spools out/retracts webbing properly.
properly or is cracked or
broken.
e. Check all seat belt mounting hardware for Hardware is loose,
looseness and other damage.
missing, rusted, corroded
or damaged.
Change 1
3-15