TM 5-2420-230-24-1
Maintenance & Service Manual
R & HR32000 3 & 6 Speed LD
Figure 50
Remove rear cover bolts and washers.
Figure 47
Remove rear bearing retainer plate bolts.
Figure 51
Using pry slots provided, pry cover from transmission housing
tapping on 1st speed clutch and idler shaft to allow cover to be
removed without shaft binding. NOTE: The use of alignment
Figure 48
studs will facilitate cover removal.
Remove retainer plate.
Figure 52
Figure 49
Remove 1st speed clutch double bearing cup, outer taper
Remove bearing locating ring.
bearing and spacer.
--9--
F-54
