TM 5-2420-230-24-1
16. Using the allen wrench, open the bleeder screw until non-aerated fluid flows from the bleed screw.
NOTE:
Do not turn the steering wheel with the bleeder open.
17.
Repeat the procedure on the slave gear if an M-Series slave is used.
18.
Check the fluid level in the power steering reservoir and fill if necessary.
19.
Shut the vehicle off.
20.
Lower the hood or cab following the procedure in the Vehicle Manufacturer's Service Manual.
21.
Lower the vehicle until the tires contact the surface and remove the jack.
K-44
