TM 5-2420-230-24-2
Balancer - Assembly (1-34)
Section 1 - Cylinder Block - Group 1
Page 1-56
B Series Shop Manual
13 mm
Apply a coat of lubriplate to the thrust housing. Install the
thrust housing. The mounting holes align in only one
position.
Torque Value: 24 Nm
[18 ft-lb]
Use clean engine oil.
Lubricate and install a new bearing into the idler gear
assembly.
Align the idler gear assembly alignment pin with the hole
in the housing.
Plastic Mallet
Tap the idler assembly gently into position.
L-259
