TM 5-2420-230-24-2
Lubricating Oil Dipstick Tube (007-011)
B3.9 and B5.9 Series Engines
Page 7-12
Section 7 - Lubricating Oil System - Group 07
Wipe off the dipstick, and install it in the dipstick tube
housing.
Fill the oil pan to the specified ``high'' oil level. Refer to
Lubricating Oil System Specifications in this section for
engine oil capacity.
Remove the dipstick, and scribe a mark across the stick at
the oil level. Label the mark with an ``H'' to indicate the
``high'' oil level.
Lubricating Oil Dipstick Tube (007-011)
Remove (007-011-002)
Remove dipstick from the dipstick tube.
Remove dipstick tube from the cylinder block.
Service Tip: Use a dent puller and an M8 x 1.25 x 21-mm
self-tapping capscrew. Thread the capscrew into the dipstick
tube, and remove the tube.
Install (007-011-026)
Apply a thin bead of LoctiteTM 277 around the bottom of the
knurled end of the tube.
L-1024
