TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Lubricating Oil Filter (Spin-On) (007-013)
Section 7 - Lubricating Oil System - Group 07
Page 7-13
Place knurled end of tube into the dipstick tube bore in the
cylinder block.
Use a flat washer and hex head capscrew to drive the tube
into the cylinder block.
Lightly drive the dipstick tube until it seats against the block
casting.
Install dipstick into the dipstick tube.
Lubricating Oil Filter (Spin-On)
(007-013)
Remove (007-013-002)
Oil Filter Wrench, Part No. 3375049
Clean the area around the lubricating oil filter head.
Use the oil filter wrench, Part No. 3375049, to remove the
filter.
Clean the gasket surface of the filter head.
Install (007-013-026)
CAUTION
The lack of lubrication during the delay until the filter
is pumped full of oil at startup is harmful to the engine.
Use clean lubricating engine oil to coat the gasket surface
of the filter.
Fill the filter with clean lubricating engine oil.
L-1025