TM 5-2420-230-24-2
Flywheel (016-005)
B3.9 and B5.9 Series Engines
Page 16-6
Section 16 - Mounting Adaptations - Group 16
Flywheel (016-005)
Remove (016-005-002)
Barring Tool, Part No. 3824591
Remove the vehicle driveline and transmission. Refer to
the manufacturer's instructions.
Remove the clutch discs and the pressure plate. Refer to
the manufacturer's instructions.
NOTE: Use the barring tool, Part No. 3824591, to hold the
flywheel to prevent rotation.
Remove two capscrews 180 degrees apart.
Install two M12 x 1.25 x 90-mm guide pins.
NOTE: If a clutch is used in the equipment, the threads in
the clutch pressure plate mounting capscrew holes can be
metric or standard. Be sure to use the correct capscrews.
Determine the capscrew thread design and size, and install
two t-handles in the flywheel at points (1 and 2).
Remove the remaining six flywheel mounting capscrews.
WARNING
The component weighs 23 kg [51 lb] or more. To avoid
personal injury, use a hoist or get assistance to lift the
component.
Remove the flywheel from the guide pins.
L-1334