TM 5-2420-232-10
0004
SERVICE LIGHT REPOSITIONING CONTINUED
Position Service Light for Road Travel - Continued
0004
7.
Once both service lights are secured, remove the lighting cable (Item 13, Table 2, WP 0031) from the toolbox and connect
between the service lights (Figure 98, Items 6 and 7) and chassis multi-plug connector (Figure 98, Item 8).
CAUTION
Ensure the lighting cables are secure and not trapped.
NOTE
Screw caps together.
8.
Check the operation of the service lights.
435-A0309
Figure 98. Positioning Service Lights for Road Travel
04
Position Service Light for Loading and All Off-Road Use
0004
CAUTION
Before carrying out any loading operations, service light must be located on cab "A" posts. Failure
to comply will result in damage to equipment.
To position service lights for all operations except on-road use, reverse the above procedure.
Change 1
0004-100