TM 5-2420-232-10
0027
UNLOADING MACHINE FROM SHIP CONTINUED
4.
Turn battery disconnect switch to ON position (WP 0004).
WARNING
Stand clear of loader/backhoe attachment area when machine is operating. There is no clearance for
personnel in this area when machine turns. Crushing could occur, resulting in injury or death to
personnel.
5.
Start engine and allow to warm up (WP 0005).
6.
Raise loader arm as required so that loader arm and work tool will clear crest of ship ramps (WP 0004). Remove shoring
from under work tool.
7.
Raise backhoe as required so that the dipper and work tool will clear crest of ship ramps (WP 0004). Remove shoring
from under work tool.
WARNING
Always use a ground guide when operating machine up or down ramps. Failure to use a ground
guide may cause injury or death to personnel or damage to equipment.
Drive with extreme caution, at low idle, and in 1st gear only. Failure to follow this warning may
cause injury or death to personnel or damage to equipment.
8.
With ground guide assistance, negotiate ramps in 1st gear only.
9.
Park machine clear of ship loading/unloading zone (WP 0005).
10. If removed, refit backhoe boom lock (WP 0005).
END OF TASK
END OF WORK PACKAGE
0027-5/(6 Blank)