TM 5-2420-232-10
0035
OPERATION
0035
1.
Grasp the front handle (Figure 2, Item 1) with your left hand and the trigger handle (Figure 2, Item 2) with your right
hand.
NOTE
These hand placement instructions are for both right-handed and left-handed users.
2.
Press down on the trigger actuator (Figure 2, Item 3) and pull the trigger (Figure 2, Item 4) until the saw reaches full rpm.
3.
Feed the rotating saw chain using a steady, constant pressure.
WARNING
Cut straight through the wood -- do not twist the saw in the cut. Failure to observe this warning
may result in injury to personnel or damage to equipment.
4.
To stop the saw, release the trigger (Figure 2, Item 4).
5.
When the tool is not in use, stop the power source (WP 0004) to reduce heat and wear.
435-A1366
Figure 2. Operation
035
0035-4