TM 5-2420-232-10
0035
CHAIN REPLACEMENT AND BAR SERVICE CONTINUED
8.
Install chain (Figure 10, Item 2) and bar (Figure 10, Item 3) on saw (Figure 10, Item 6) with two loosely installed nuts
(Figure 10, Item 1).
9.
Install cover (Figure 10, Item 4) on saw (Figure 10, Item 6) with two knobs (Figure 10, Item 5).
435-A1385
Figure 10. Chain Replacement
035
10. Ensure that chain is installed as shown (Figure 11). Adjust the tension of the chain as described under Adjusting Chain
Tension.
435-A1388
Figure 11. Direction of Chain Travel
035
0035-10