TM 5-2420-232-10
0041
SWEEPER CONTROLS CONTINUED
Engaging the Sweeper Brush Head
00041
There is a second (auxiliary) control lever next to the standard one. The standard lever operates as described earlier. The sec-
ond (auxiliary) lever operates the slewing and the engagement of the sweeper brush head.
WARNING
Accidents can be caused by working in poor visibility. Keep windows clean and use your lights to
improve visibility. Do not operate the machine if you cannot see properly. Failure to follow this
warning may result in injury or death to personnel.
Engage Brush Head for Sweeping. To engage the brush head (Figure 6, Item 1) for sweeping, pull the lever (Figure 6,
1.
Item 2) backwards.
2.
To Engage Detent for Continuous Sweeping. To engage the detent for continuous sweeping, pull the lever (Figure 6,
Item 2) backwards until the lever locks in place.
3.
Engage Brush Head in Reverse. To engage the brush head (Figure 6, Item 1) in reverse, push the lever (Figure 6, Item 2)
forward.
435-A1405
Figure 6. Engaging Sweeper
041
0041-7