TM 5-3805-280-24-1
Track System
01
0130
6. Install DFT1087 Track Recoil Spring Disassembly and
54
Assembly Guard Tool (F). (See Section 99 for
instruction to make tool.)
7. Install plate (A) (plate with smallest opening to allow
access to nut (D)) and nuts (B) .
8. Extend jack ram so there is enough travel to release
recoil spring to the approximate free length.
Recoil Spring--Specification
Free Length ................................................. 689 mm (27 in.) approximate
9. Tighten nuts (B) so plate is tight against retainer plate.
10. Remove valve (C). Remove special plug (E).
A--Top Plate
B--Nut (8 used)
C--Valve
D--Nut
E--Special Plug
F--DFT1087 Track Recoil Spring Disassembly and
Assembly Guard Tool
Continued on next page
TX,01,GG2767 1918SEP983/4
11-54