TM 5-3805-280-24-2
Removal and Installation
Item
Measurement
Specification
Starter Mounting
47 Nm (35 lb-ft)
Flange-to-Flywheel Housing Cap
Screw
04
0400
4
CED,OUOE003,1161
1918SEP982/2
REMOVE ENGINE
CAUTION: Explosive release of fluids from
pressurized cooling system can cause serious
burns
Shut off engine. Only remove filler cap when
cool enough to touch with bare hands. Slowly
loosen cap to first stop to relieve pressure
before removing completely.
1. Disconnect negative (-) battery cable.
2. Drain coolant. Cooling capacity is approximately 28.4 L
(30 qt).
TX,04,UU3872
1918SEP981/5
3. Remove hood and hood support (A).
A--Hood Support
Continued on next page
TX,04,UU3872
1918SEP982/5
13-4
