TM 5-3805-280-24-2
Cylinder Block, Liners, Pistons and Rods
10
Item
Measurement
Specification
9
Camshaft Journal-to-Bushing (All
Oil Clearance
0.088--0.140 mm (0.0035--0.0055
Except No. 1)
in.)
Balancer Shaft Bore in Block
ID
43.262--43.288 mm (1.7032--
(Bushing Removed)
1.7042 in.)
Balancer Shaft Bushing
ID
40.177--40.237 mm (1.5818--
1.5841 in.)
Balancer Shaft Journal-to-Bushing
Clearance
0.016--0.102 mm (0.0006--0.0040
in.)
Lower Block Bore for Seating Liner
ID
115.75--115.80 mm (4.557--4.559
in.)
Upper Block Bore for Seating Liner
ID
120.70--120.75 mm (4.752--4.754
in.)
Liner Flange ID in Block
ID
126.33--126.35 mm (4.973--4.974
in.)
OD of Liner at Upper Bore
OD
120.61--120.69 mm (4.7484--
4.7516 in.)
Liner-to-Cylinder Block Clearance at
Clearance
0.035--0.100 mm (0.001--0.004 in.)
Lower Bore
Liner-to-Cylinder Block Clearance at
Clearance
0.10--0.14 mm (0.004--0.005 in.)
Upper Bore
Cylinder Liner
ID
106.48--106.52 mm (4.192--4.194
in.)
Cylinder Wear
Maximum Wear
0.10 mm (0.004 in.)
Cylinder Taper
Maximum Taper
0.05 mm (0.002 in.)
Cylinder Out-of-Round
Maximum Out-of-Round
0.05 mm (0.002 in.)
Cylinder Liner Flange Counterbore
Depth
5.952--5.988 mm (0.2343--0.2357
Depth in Block
in.)
Cylinder Liner Flange
Thickness
6.022--6.058 mm (0.2371--0.2385
in.)
Continued on next page
DPSG,OUO1004,230
1910JUL984/6
13-122
