TM 5-3805-280-24-2
Crankshaft, Main Bearings and Flywheel
RG5109 UN23AUG88
15
Seal Remover . . . . . . . . . . . . . . . . . . . . . . . . JDG22
2
Remove crankshaft front oil seal with timing gear cover
installed. Also used to remove crankshaft rear oil seal
without removing flywheel housing.
DPSG,OUO1004,174
1907JUL985/15
RG6214 UN05DEC97
Seal Puller Adapter . . . . . . . . . . . . . . . . . . . . JDG719
Used with standard metal screw, JDE38-2 shank, and
JDE38-3 Slide Handle to remove front crankshaft oil seal
with timing gear cover installed. Also used to remove rear
crankshaft oil seal with seal housing installed.
DPSG,OUO1004,174
1907JUL986/15
Flywheel Turning Tool . . . . . . . . . . . . . . . . . . JDG820
Used to rotate flywheel on engines with 129-tooth flywheel
ring gear and a 29.9 mm (1.18 in.) flywheel housing guide
bore diameter. JDE81-1 may be used if JDG820 is not
available.
DPSG,OUO1004,174
1907JUL987/15
Flywheel Turning Tool . . . . . . . . . . . . . . . . . . . JDE83
Used to rotate flywheel on engines with 142-tooth flywheel
ring gear and a 26.5 mm (1.04 in.) flywheel housing guide
bore diameter.
Continued on next page
DPSG,OUO1004,174
1907JUL988/15
13-180
