TM 5-3805-280-24-2
Camshaft, Balancer Shafts and Timing Gear Train
16
Item
Measurement
Specification
7
Oil Pump-to-Lower Idler (E)1
Backlash
0.081--0.6037 mm (0.0032--0.0235
in.)
Balancer Shaft-to-Oil Pump (4-Cyl
Backlash
0.065--0.6521m (0.0025--0.0254
Only) (F)1
in.)
Lower Idler-to-Balancer Shaft
Backlash
0.071--0.6476 mm (0.0028--0.0253
(4-Cyl Only) (G)
in.)
Camshaft-to-Auxiliary Drive (Not
Backlash
0.053--0.6818 mm (0.0021--0.0266
Shown)
in.)
Camshaft Thrust Plate
Clearance
0.08--0.23 mm (0.003--0.009 in.)
Camshaft Thrust Plate
Thickness
3.96--4.01 mm (0.156--0.158 in.)
Camshaft Bearing Bores and
Journals
Camshaft Journal
OD
55.872--55.898 mm (2.1997--
2.2007 in.)
Camshaft Bore, Front No. 1 in
ID
59.961--59.987 mm (2.3607--
Block (Without Bushing)
2.3617 in.)
Camshaft Bore, Front No. 1 in
ID
55.961--55.987 mm (2.2031--
Block (With Bushing)
2.2042 in.)
Camshaft Bore, All Except No. 1
ID
55.986--56.012 mm (2.2042--
2.2052 in.)
Camshaft Journal-to-Bushing, No.1 Oil Clearance
0.063--0.115 mm (0.0025--0.0045
Bore (With Bushing)
in.)
Camshaft Journal-to-Bushing, All
Oil Clearance
0.088--0.140 mm (0.0035--0.0055
Except No.1 Bore
in.)
Camshaft Intake Lobes
Height
7.05--7.31 mm (0.278--0.288 in.)
Camshaft Exhaust Lobe
Height
6.89--7.15 mm (0.271--0.281 in.)
1
4-cylinder engine only
Continued on next page
DPSG,OUO1004,232
1910JUL982/5
13-239
