TM 5-3805-280-24-2
Lubrication System
REMOVE, INSPECT, AND INSTALL OIL
20
10
COOLER
REMOVE OIL COOLER ASSEMBLY:
1. Remove oil cooler drain plug (D) and drain coolant.
2. On high mount, rear and front mount oil filters, remove
oil filter header with tubes and adapter/cooler cover if
equipped. See REMOVE, INSPECT, AND INSTALL
OIL FILTER BASE, earlier in this group.
3. On left hand or remote oil filters, disconnect oil lines
(A) and remove cooler cover (B).
4. Remove elbow adapter (C).
5. Remove housing (E).
6. Remove oil cooler (F).
A--Oil Lines
B--Cover
C--Adapter
D--Oil Drain Plug
E--Oil Cooler Housing
F--Oil Cooler
Continued on next page
RG,20,DT7531 1917NOV971/5
13-303